Pāriet uz produkta informāciju
1 no 2

MTS Technik

MTS Technik koiloveri Street Gold - Volkswagen CADDY IV MPV (SAB/SAJ)

MTS Technik koiloveri Street Gold - Volkswagen CADDY IV MPV (SAB/SAJ)

KODS :MTSGWVW49

Parastā cena €599,00 EUR
Parastā cena Pārdošanas cena €599,00 EUR
Akcija Nav noliktavā, raksti siadkracing@gmail.com, lai pasūtītu.
ar PVN. Piegāde tiek aprēķināta apmaksas laikā
Front axle load
Daudzums

MTS Technik Street coilover kit with Gold housing for Volkswagen CADDY IV MPV (SAB/SAJ).

SeriesStreet
HousingGold
Camber platesno
Lowering front35 - 90 mm
Lowering rear35 - 90 mm
TÜVyes

Specifications

Series Street
Housing Gold
Camber plates / top mounts Without
Lowering front 35 - 90 mm
Lowering rear 35 - 90 mm
Max. axle load rear? max 1300 kg
TÜV certificate yes

Versions

Part number Front axle load Main spring rate
MTSGWVW49 max 1075 kg GWFE22VA (32 N/mm)
MTSGWVW34 1076-1235 kg GWFE27VA-01 (34 - 40 - 70 N/mm)

Vehicle fitment

All versions fit the vehicles listed below. Choose the version by Front axle load — the permissible axle loads are on the rating plate of your car.

?How to check the axle loads of your car
Rating plate

Be sure to check the maximum permissible loads on both axles of your car. This is crucial information! Only if these values are not exceeded, you have a guarantee that the lowering of the car and the operation of the suspension will be consistent with the catalog. You will find this data only on the car's rating plate. The commonly used coding is 1 - XXX kg / 2 - XXX kg, where respectively "1 -" is the maximum permissible front axle load and "2 -" is the maximum permissible rear axle load. Write down these values and compare them with the catalog. If any of them exceed the value from the catalog, it means that the product is not intended for your car.

Vehicle / engine Years · power · drive
1.0 TSI / 1.2 TSI / 1.4 TSI / 1.6 / 1.6 TDI / 2.0 TDI
05/15 - 12/20
55 - 110 kW / 75 - 150 HP
FWD

Features

Eibach springs
Eibach springsCoilover springs made by Eibach, the world leader in the sport springs industry.
Anti-corrosion protection yellow galvanized
Anti-corrosion protection yellow galvanizedDouble zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
2 years warranty
2 years warranty2 year warranty with no mileage limit to confirm high quality.
hexaCOIL adjustable spring perch
hexaCOIL adjustable spring perchInnovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Twin-tube construction
Twin-tube constructionThe use of twin-tube technology guarantees stable shock absorber performance.
Gas technology
Gas technologyPressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread
Specially selected type of threadSpecially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
High quality
High qualitySuspension components characterized by increased corrosion resistance and made of the highest quality materials.

Product notes

3Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
8Not for 4x4.
19Only for vehicles equipped with single-leaf springs on the rear axle. Vehicles equipped with two-leaf springs on the rear axle must be converted to single-leaf springs. For Caddy, use VW leaf spring part no. 2K0 511 151 N. For Caddy Maxi, use VW leaf spring part no. 2K3 511 151 E.
21If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
44Installation of the rear axle adjustment must be carried out in accordance with the instructions.
45Front and rear axle height adjustable (threaded shock absorber housing on the front, provided adjustment plates + shock absorbers on the rear axle).
116Cars with two-leaf spring on the rear axle should be swapped to on-leaf spring. VW Caddy 3 (-05/2015): 2K5 511 151 N, VW Caddy 4 (05/2015-): 2K5 511 151 AA, VW Caddy MAXI: 2K3 511 151 E.

Downloads

For all versions

For each version

Part number · Front axle load Documents for this version
MTSGWVW49max 1075 kg
PDFSpare part listPDFInstallation manual
MTSGWVW341076-1235 kg
PDFSpare part listPDFInstallation manual
Skatīt pilnu informāciju